This directory contains binaries for a base distribution and packages to run on macOS. Releases for old Mac OS X systems (through Mac OS X 10.5) and PowerPC Macs can be found in the old directory.Note: Although we take precautions when assembling binaries, please use the normal precautions with downloaded executables.
Package binaries for R versions older than 3.2.0 are only available from the CRAN archive so users of such versions should adjust the CRAN mirror setting ( -archive.r-project.org) accordingly.R 4.2.2 "Innocent and Trusting" released on 2022/10/31 Please check the integrity of the downloaded package by checking the signature: pkgutil --check-signature R-4.2.2.pkg in the Terminal application. If Apple tools are not avaiable you can check the SHA1 checksum of the downloaded image: openssl sha1 R-4.2.2.pkgLatest release:R-4.2.2-arm64.pkg (notarized and signed)SHA1-hash: c3bb657ca6912b9b98e254f63434a365da26848f(ca. 86MB) for M1 and higher Macs only! R 4.2.2 binary for macOS 11 (Big Sur) and higher, Apple silicon arm64 build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 for Apple silicon Macs (M1 and higher), Tcl/Tk 8.6.12 X11 libraries and Texinfo 6.8. Important: this version does NOT work on older Intel-based Macs - see below for Intel version.Note: the use of X11 (including tcltk) requires XQuartz (version 2.8.1 or later). Always re-install XQuartz when upgrading your macOS to a new major version.This release uses Xcode 13.1 and experimental GNU Fortran 12 arm64 fork. If you wish to compile R packages which contain Fortran code, you may need to download GNU Fortran for arm64 from -project.org/tools. Any external libraries and tools are expected to live in /opt/R/arm64 to not conflict with Intel-based software and this build will not use /usr/local to avoid such conflicts (see the tools page for more details). R-4.2.2.pkg (notarized and signed)SHA1-hash: 99b8d184f855e630ac950ca4e62cb7fc9a1f7b2e(ca. 87MB) for Intel Macs R 4.2.2 binary for macOS 10.13 (High Sierra) and higher, Intel 64-bit (older Macs) build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 6.7. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed (version 2.7.11 or later) since it is no longer part of macOS. Always re-install XQuartz when upgrading your macOS to a new major version.This release supports Intel Macs, but it is also known to work using Rosetta2 on M1-based Macs. For native Apple silicon arm64 binary see above.Important: this release uses Xcode 12.4 and GNU Fortran 8.2. If you wish to compile R packages from sources, you may need to download GNU Fortran 8.2 - see the tools directory. NEWS (for Mac GUI)News features and changes in the R.app Mac GUIMac-GUI-1.78.tar.gz SHA1-hash: 23b3c41b7eb771640fd504a75e5782792dddb2bcSources for the R.app GUI 1.78 for macOS. This file is only needed if you want to join the development of the GUI (see also Mac-GUI repository), it is not intended for regular users. Read the INSTALL file for further instructions.Note: Previous R versions for El Capitan can be found in the el-capitan/base directory.Binaries for legacy OS X systems: R-3.6.3.nn.pkg (signed) SHA1-hash: c462c9b1f9b45d778f05b8d9aa25a9123b3557c4 (ca. 77MB) R 3.6.3 binary for OS X 10.11 (El Capitan) and higher, signed package. Contains R 3.6.3 framework, R.app GUI 1.70 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources. R-3.3.3.pkgMD5-hash: 893ba010f303e666e19f86e4800f1fbfSHA1-hash: 5ae71b000b15805f95f38c08c45972d51ce3d027(ca. 71MB)R 3.3.3 binary for Mac OS X 10.9 (Mavericks) and higher, signed package. Contains R 3.3.3 framework, R.app GUI 1.69 in 64-bit for Intel Macs, Tcl/Tk 8.6.0 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", it is only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed since it is no longer part of OS X. Always re-install XQuartz when upgrading your OS X to a new major version. R-3.2.1-snowleopard.pkgMD5-hash: 58fe9d01314d9cb75ff80ccfb914fd65SHA1-hash: be6e91db12bac22a324f0cb51c7efa9063ece0d0(ca. 68MB)R 3.2.1 legacy binary for Mac OS X 10.6 (Snow Leopard) - 10.8 (Mountain Lion), signed package. Contains R 3.2.1 framework, R.app GUI 1.66 in 64-bit for Intel Macs.This package contains the R framework, 64-bit GUI (R.app), Tcl/Tk 8.6.0 X11 libraries and Texinfop 5.2. GNU Fortran is NOT included (needed if you want to compile packages from sources that contain FORTRAN code) please see the tools directory.NOTE: the binary support for OS X before Mavericks is being phased out, we do not expect further releases! The new R.app Cocoa GUI has been written by Simon Urbanek and Stefano Iacus with contributions from many developers and translators world-wide, see "About R" in the GUI.Subdirectories: tools Additional tools necessary for building R for Mac OS X:Universal GNU Fortran compiler for Mac OS X (see R for Mac tools page for details). base Binaries of R builds for macOS 10.13 or higher (High Sierra), Intel build contrib Binaries of package builds for macOS 10.13 or higher (High Sierra), Intel build big-sur-arm64 Binaries for macOS 11 or higher (Big Sur) for arm64-based Macs (aka Apple silicon such as the M1 chip) el-capitan Binaries of package builds for OS X 10.11 or higher (El Capitan build) mavericks Binaries of package builds for Mac OS X 10.9 or higher (Mavericks build) old Previously released R versions for Mac OS X You may also want to read the R FAQ and R for Mac OS X FAQ. For discussion of Mac-related topics and reporting Mac-specific bugs, please use the R-SIG-Mac mailing list.Information, tools and most recent daily builds of the R GUI, R-patched and R-devel can be found at -project.org/. Please visit that page especially during beta stages to help us test the macOS binaries before final release!Package maintainers should visit CRAN check summary page to see whether their package is compatible with the current build of R for macOS.Binary libraries for dependencies not present here are available from -project.org/bin and corresponding sources at -project.org/src.Last modified: 2022/10/31, by Simon Urbanek
Firefox version 78 was the last supported Firefox version for Mac users of OS X 10.9 Mavericks, OS X 10.10 Yosemite and OS X 10.11 El Capitan. These users were moved to the Firefox Extended Support Release (ESR) channel by an application update. This was done to provide security updates until the final Firefox 78 ESR update (version 78.15.0esr) was released on October 5, 2021. Affected users will not receive any further security updates.
STEP 1: Review the NVIDIA Software License. Check terms and conditions checkbox to allow driver download. You will need to accept this license prior to downloading any files.STEP 2: Download the Driver File- CUDADriver-6.0.37-macos.dmg STEP 3: Install
In early February 2014 xcode-select --install has been reporting that "Can't install the software because it is not currently available from the Software Update server". In late February 2014 the command started only displaying help. The solution is to download directly, see "Separate Download" below.
With Xcode 5.0.1 and Mavericks 10.9 the command line tool is no longer available through Xcode. Instead they must be downloaded from the Apple Developer Tools site: This requires signing in with a developer account.
Go to developer.apple.com/downloads/index.action, and sign in with your Apple ID (the download's free). In the pane on the left, search for "command line tools" and choose the package appropriate to your version of OS X. Requires Mac OS X 10.7.3 or later.
Here are links for Command Line Tools, located at Apple Developer Server. You may need an apple developer (Paid/Premium) account to access them. You can download current (stable and beta) Xcode Tools. (It does not need device verification. Just ensure your macOS and XCode Tool/SDK version while choosing your command line tool)
Unlike log files, deep-linking Web pages, and the Xcode Preferences window, this page also links to lots of other useful downloads for free and paid developers alike, including everything else that has been unbundled from Xcode (audio tools, accessibility tools, etc.), OS X kernel debug builds, and release versions of Xcode back to 1.0.
April 2014 version direct download link (for developers who just want to get started right away) =Developer_Tools/command_line_tools_os_x_mavericks_for_xcode__april_2014/command_line_tools_for_osx_mavericks_april_2014.dmg
If Xcode is installed on your machine, then there is no need to install them. Xcode comes bundled with all your command-line tools. OS X 10.9 includes shims or wrapper executables. These shims, installed in /usr/bin, can map any tool included in /usr/bin to the corresponding one inside Xcode. xcrun is one of such shims, which allows you to find or run any tool inside Xcode from the command line. Use it to invoke any tool within Xcode from the command line. ...
In most cases, the downloaded dmg file is actually corrupt or had an error downloading. If possible, try downloading the dmg again, turning off any download assistant plug-ins you may have. You can try downloading the file in a different browser as well. Or if you don't need to be logged in to the site to download the file and you want to be fancy, you can try curl -O url in Terminal to download the file. (There's an example of that in my screenshot below.) 2b1af7f3a8